Home  Assistance  ICO Support & Sensors  Can I leave ICO out of the water?

Can I leave ICO out of the water ?

 ICO SPA 

 

During your bath, you may temporarily remove ICO from the spa.

  • Place ICO in a container with spa water (1l) at temperature to avoid possible thermal shock.
  • Replace it in the water as soon as you stop using the spa.
  • After 24 hours: Replace the sensor protections having previously moistened the small sponges placed inside. These protective caps are designed to maintain the durability of your sensors. Then turn off your ICO.

During the quarterly draining, it is preferable to protect the sensors with the moistened sponges. You can place the ICO back in the water when the spa is refilled. The first measurements will be taken automatically.

During winterization, don’t hesitate to put ICO back in its protected box, away from dust, so that it can be used again in the best conditions at the beginning of the next season. Follow our advices to winterize your spa.

 

 ICO POOL

ICO POOL can be placed either in the pool or in the skimmer during swimming.

If you wish to put ICO out of the water :

  • Place ICO in a container with pool water (1l) at temperature.
  • After 24 hours: Replace the sensor protections, having first moistened the small sponges placed inside. These protective caps are designed to maintain the durability of your sensors. Then turn off your ICO.

During winterization, don’t hesitate to put the ICO back in its protected box, away from dust, so that it can be used again in the best conditions at the beginning of the next season. Follow our advice to winterize your pool.

Need more assistance ? 

ICO HELP CENTER

Pin It on Pinterest

0
    0
    Your Cart
    Your cart is emptyReturn to Shop