29,90€
Regular calibration of the pH (blue) and ORP (orange: chlorine/bromine; yellow: salt) sensors ensures the reliability of the measurements. Storing the sensors in KCl solution optimises their performance. Therefore, both calibration and storage are essential for the reliability and longevity of the sensors.
The ICO calibration kit is compatible with ICO Pool and ICO Spa.
Calibration is used to correct measurement drift caused by normal wear and tear on the probe; therefore, it is not necessary to calibrate a new sensor. However, if you wish to ensure the accuracy of the measurement, you can carry out a calibration
After the first season, we recommend calibrating the sensors:
– seasonal use: every time you start up your swimming pool or spa
– For year-round use: every six months if you do not overwinter your plants
- or if you notice a drift in the measurements.
In stock
Delivery in Europe
within 4 to 7 working days
Shipping in Europe
Colissimo, Chronopost and Mondial Relay
Secured payment
Monetico, Paypal
free of charge
via PayPal
The calibration and storage kit contains everything you need to calibrate and store the pH and ORP probes for your ICO. The calibration and storage kit contains 4 sachets of solution and 1 calibration stand.
The ICO connected water analyser is a measuring device. If it is not calibrated regularly, the pH and oxidation-reduction potential (ORP) readings may become inaccurate and drift over time, which could lead to the incorrect use of chemicals (overdosing or underdosing) and affect your swimming experience in your pool.
Tips for calibration:
Steps for calibration: The app guides you step by step
We recommend that you keep the pH 4 and pH 7 solutions in two separate containers until the calibration has been validated, in case you need to recalibrate the instrument.
This video tutorial explains why and how to calibrate the sensors on your ICO.
Once you have completed your calibrations, a message showing the result will appear with thethe date and readings of the most recent pH and ORP calibrations. These can also be viewed in the Settings/ICO section
lThe date and the calibration values at pH 4 and pH 7 are displayed
the values from the most recent pH and ORP-redox calibrations are displayed
| Sachets | 4 single-use sachets of 20 ml |
| Support | 1 transparent calibration template |
| Packaging dimensions | 15,8cm x 15,6cm x 4,1 cm |
| Weight | 0.16kg |
This calibration and storage kit includes:
No. The ICO is supplied ready for use, pre-loaded with calibrated probes.
As with any measuring instrument, it is necessary to calibrate the probes to ensure accurate measurements and maximise their service life.
We recommend calibrating the pH and ORP probes on your ICO:
– Seasonal use: each time you restart your pool. Calibration should not be carried out before winterising.
– annual use: every six months.
The pH probe is calibrated using buffer solutions at pH 4 and 7, and the ORP is calibrated using a 470 mV solution.
More about probe calibration.
If you are replacing a pH or ORP probe with a new one, there is no need to calibrate it. However, you must reset the sensor in the app when you install it
The reference electrodes (sensor bulbs) of the pH/ORP probes on ICO-connected water analysers must always be kept moist. They should be stored as follows: immersed in the storage solution (KCl solution) using the sponges, and protected with the black caps (sponges and black caps supplied with the product).
